37
5. Using On-Screen Menu
[Standby mode]
Set power consumption in standby mode, no matter whenever your projector is operated through network.
1) Press
▲ ▼
button to select [Standby mode] menu.
2) Press <ENTER> button.
3) Press
▲ ▼
button to adjust levels.
Normal......Some function will be disabled once your projector is in ECO. standby mode to reduce power consumption.
network and RS-232C serial communication will be unavailable except the power on command during that mode.
Network standby......In order to reduce power consumption, some functions in standby mode will be limited. Under
network standby, network function is not available and RS-232C serial communication (except boot command)
function is not available.
• Standby mode network wake-up function can only use the "Wake On LAN" tool.
Sleep ........Even in standby mode,there are no restraint on network function and serial communication function.
On start
HDMI setup
Setting
Standby mode
High altitude
ECO mode
Cooling fast
Closed caption
Key lock
lris
Baud rate
Sound
Off
Normal
Normal
Off
Normal
Off
Off
Off
19200
[High altitude]
You can change the setting about speed of cooling fan according to the altitude your projector is operating at.
1) Press
▲ ▼
button to select [High altitude] menu.
2) Press <ENTER> button.
3) Press
▲ ▼
button to select required menu.
Off: Normal speed. set the option off when operating the operator, if the altitude is not too high.
On: Faster than when in off mode .set the option on when operating the operator in high land.
Note:
• Set high altitude option on when you operate the operator at an altitude of approximately 1700 m/5500 f or higher.
On start
HDMI setup
Setting
Standby mode
High altitude
ECO mode
Cooling fast
Closed caption
Key lock
lris
Baud rate
Sound
Off
Normal
Normal
Off
Normal
Off
Off
Off
19200
