－
x
－
Installation, Relocation, Storage, and Connection
Do not use or store this product in corrosive environment.
Avoid the usage or storage of this product in an environment which may be exposed to
corrosive gases, such as those including but not limited to: sulfur dioxide, hydrogen
sulfide, nitrogen dioxide, chlorine, ammonia and/or ozone. Avoid installing this product
in a dusty environment or one that may be exposed to corrosive materials such as sodium
chloride and/or sulfur. Avoid installing this product in an environment which may have
excessive metal flakes or conductive particles in the air. Such environments may cause
corrosion or short circuits within this product, resulting in not only damage to this
product, but may even lead to be a fire hazard. If there are any concerns regarding the
environment at the planned site of installation or storage, please contact your sales agent
．
Do not install the product in any place other than specified.
Do not install the product in the following places or any place other than specified in this
Guide. Failure to follow this instruction may cause a fire.
・
a dusty place
・
a humid place such as near a boiler
・
a place exposed to direct sunlight
・
an unstable place
Do not install the parts other than specified.
Do not install third-party products or options on the device. Operation is no longer
successful, and may cause fire or malfunction.
Do not block the intake and exhaust holes.
Do not block air intake holes at the front or back of the product. Internal temperature rises
may cause malfunction and doing so may cause a fire.
Do not use any unauthorized interface cable.
Use only interface cables provided by NEC and locate a proper device and connector
before connecting a cable. Using an unauthorized cable or connecting the product to an
improper destination may result in a fire by short circuit. Also, observe the following
notes on using and connecting an interface cable.
・
Do not step on the cable.
・
Do not place any object on the cable.
・
Do not use the device with loose cable connections.
・
Do not use any damaged cable connector.
・
Lock the cable certainly by the attachments such as screws.
Treat SAS cables with care and respect.
Rough treatment of SAS cables could cause deterioration of characteristics or mechanical
damage (line disconnection).
・
Ensure a minimum bending radius of 150mm.
・
Make sufficient allowance for the cable forming.
・
Do not forcibly stretch a cable or otherwise stress it.
