46
BNC/D-SUB :
Erlaubt ein Wechseln zwischen den BNC- und den D-SUB-Signaleingängen.
Mit den vorne am Monitor befindlichen OSM- (On-Screen Manager)-Tasten werden die
folgenden Funktionen ausgeführt :
Um auf das OSM-Menü zuzugreifen, drücken Sie eine beliebige Steuertaste (
,
,
,
) bzw. die Taste PROCEED oder EXIT.
Um das OSM-Menü zwischen Längs- und Querformat umzustellen, drücken Sie die Taste RESET.
HINWEIS: Das OSM-Menü muß vor dem Umstellen geschlossen werden.
Hauptmenü
Untermenü
EXIT
Beendet das OSM-Menü.
Führt zum OSM-Hauptmenü zurück.
CONTROL
Verschiebt den hervorgehobenen
Verschiebt den hervorgehobenen
/
Bereich nach oben oder unten, um
Bereich nach oben oder unten, um
einen Menüpunkt auszuwählen.
einen Menüpunkt auszuwählen.
CONTROL
Verschiebt den hervorgehobenen
Verschiebt den Balken nach rechts
/
Bereich nach rechts oder links, um ein
oder links, um die Einstellung zu erhöhen
Steuermenü auszuwählen.
oder zu verringern.
PROCEED
Diese Taste hat keine Funktion.
Aktiviert die Funktionen Auto Adjust
und ALL RESET.
RESET
Setzt alle Einstellungen des
Setzt die hervorgehobene Einstellung
hervorgehobenen Steuermenüs auf
auf die Werkseinstellung zurück.
die Werkseinstellung zurück
HINWEIS: Wird die
RESET
-Taste im Haupt- oder Untermenü gedrückt, so erscheint ein
Warnfenster, das Ihnen ein Abbrechen der
RESET
-Funktion durch Betätigung der Taste EXIT
ermöglicht.
Helligkeits-/Kontrastregler
BRIGHTNESS
Zur Einstellung der Helligkeit des Gesamtbildes und des
Bildschirmhintergrundes.
CONTRAST
Zur Einstellung der Bildhelligkeit in Vergleich zum Hintergrund.
AUTO ADJUST CONTRAST
Paßt das angezeigte Bild an, falls nicht standardmäßige
Videoeingangssignale vorliegen.
OSM LOCK OUT
Die Funktion OSM LOCK OUT verhindert den Zugriff auf alle OSM-
Funktionen zur Gänze. Wenn Sie versuchen, OSM-Funktionen zu
aktivieren, während sich das Gerät im LOCK OUT-Modus befindet, wird
ein Bildschirm eingeblendet, der Sie darauf hinweist, daß der Zugriff auf
die OSM-Funktionen gesperrt ist.
• Um in den LOCK OUT-Modus zu gelangen, drücken Sie gleichzeitig die
Tasten PROCEED und
Daraufhin wird das LOCK OUT-Fenster
eingeblendet.
Bedienungselemente
AUTO
LCD2110usersmanual
4/23/01, 10:45 AM
48