2-in
9
Quick Start cont.
Tilt and Swivel
Grasp both sides of the monitor screen
with your hands and adjust the tilt and
swivel as desired (
Figure TS.1
)
.
Remove Monitor Stand for
Mounting
To prepare the monitor for alternate mount-
ing purposes:
1. Disconnect all cables.
2. Place hands on each side of
the monitor and lift up to the highest position (
Figure RL.1
)
.
3. Place monitor face down on a non-abrasive surface. (Place the screen on
a 2-inch platform so that the stand is parallel with the surface.)
(
Figure S.1
)
4. Remove the stand cover by sliding the top/bottom pieces off the stand
(Figure S.2).
Remove the 4 screws connecting the monitor to the stand
and lift off the stand assembly (
Figure S.3
)
.
The monitor is now ready for
mounting in an alternate manner.
5. Reverse this process to reattach stand.
NOTE: Use only VESA-compatible alternative mounting method.
1
2
3
4
Figure S.2 and Figure S.3
Figure S.1
Figure TS.1
78133813.wpc
10/28/99, 3:21 PM
11