To attach your MultiSync
®
LCD
2010
™
monitor to your system, follow
these instructions:
1. Turn off the power to your computer.
2. For the PC: Connect the 15-pin mini D-SUB of the appropriate signal cable
to the connector of the display card in your system
(Figure G.1)
. Tighten all screws.
For the Mac: Connect the MultiSync Macintosh cable adapter to the computer
(Figure
H.1)
. Attach the 15-pin mini D-SUB end of the appropriate signal cable to the
MultiSync Macintosh cable adapter
(Figure H.1)
. Tighten all screws.
NOTE: To obtain the MultiSync Macintosh cable adapter, call NEC Technologies at
(800) 820-1230.
Quick Start cont.
6
Figure G.1
Figure H.1
78133813.wpc
10/28/99, 3:21 PM
8