4-5
Page 4
In this page, it is possible to confirm the firmware version, and make factory preset.
Version
The firmware version is displayed.
Factory Preset
When the [
−
(AUTO)] key or [ + (DVI/D-SUB)] key is pressed, it becomes possible to reset all the
functions (HOURS RUNNING, AUTO ADJUST CONT and AUTO INFORMATION) to their initial values.
Page 5
This menu is used to avoid problems (blanking, turbulence in images, etc.) possibly occurring when
connections are made to a personal computer or a video card, where a non-standard digital signal output is
generated. Usually it should not be changed.
UNSTABLE H PERIOD
:
The number of counts to identify that the horizontal sync has changed.
UNSTABLE V PERIOD
:
The number of counts to identify that the vertical sync has changed.
H WIDTH TOLERANCE
: Variation in the identification that the horizontal width sync has changed.
H TOTAL TOLERANCE
: Variation in the identification that the horizontal total sync has changed.
TMDS REGENERATION
: 0: Hsync / VSync from the TMDS receiver block is used.
1:
Automatic
changeover
2: DE from the TMDS receiver block is used.
SYNC MISS COUNT
:
The number of counts to identify that there is no sync signal.
NMV1700NX
1 2 3 4 5
VERSION
F012
02/04/17
FACTORY PRESET
NMV1700NX
1 2 3 4 5
UNSTABLE H PERIOD
3
UNSTABLE V PERIOD
2
H WIDTH TOLERANCE
1
H TOTAL TOLERANCE
4
TMDS REGENERATION
1
SYNC MISS COUNT
5