Les boutons de réglage OSM
MC
situés sur l’avant du moniteur fournissent
les fonctions suivantes :
Pour accéder au menu OSM, appuyez sur une des touches de commande
( , , , ).
À transformer signale de l’entrée, presser le INPUT 1/2 bouton.
Menu principal
Sous-menu
EXIT
Quitte les commandes OSM.
Retour au menu principal OSM.
CONTROL
Déplace la zone en surbrillance vers
Déplace la zone en surbrillance vers
/
le haut/le bas pour sélectionner une
le haut/le bas pour sélectionner une
des commandes.
des commandes.
CONTROL
Déplace la zone en surbrillance vers la
Déplace la curseur vers la gauche/la droite
/
gauche/droite pour sélectionner
pour augmenter la valeur du réglage.
une des commande.
PROCEED
Pas de fonction.
Verrouillez réglage automatique fonction. En mode
De la poussée PROCEED
Outils et d’Information, ouvre, supplémentaire le
pour activer qu’Auto Ajuste.
window.
RESET
Rappel des paramètres usines du
Rappel des paramètres usines de la
menu des commandes en surbrillance.
commande en surbrillance.
NOTA : En appuyant sur le bouton
RESET
dans un menu ou dans un sous-menu, une fenêtre s’affiche
vous permettant d’annuler la fonction
RESET
en appuyant sur le bouton EXIT.
Commandes de luminosité/contraste
LUMINOSITÉ
Règle la luminosité de l'image générale et de l'écran d'arrière-plan.
CONTRASTE
Règle la luminosité de l'image par rapport à l'arrière-plan.
RÉGLAGE AUTO
Règle l’image affichée pour les modes vidéo non standard.
Réglage automatique
Règle automatiquement la position, le format horizontal ou la résolution fine.
Commandes de position
GAUCHE/DROITE
Contrôle la position horizontale de l’image dans la zone d’affichage du LCD.
BAS/HAUT
Contrôle la position verticale de l’image dans la zone d’affichage du LCD.
RÉGLAGE AUTO
Corrige automatiquement la position horizontale et verticale dans la zone
d’affichage du LCD.
29
Commandes
LCD1830.wpc
11/29/00, 9:56 AM
31