background image

 

 

 IWSTAND

 Assembly Instructions 

 

 

                            © NEC Display Solutions of America. All Rights Reserved, 2007

Frame Assembly 

 

The first step in the assembly process is 
to identify and place all the frame mem-
bers on the floor as shown.   

 

Please note that all of the frame mem-
bers have been color coded for easy 
identification.  See 

Parts List 

for color 

code and identification numbers. A 

Color

 

Dot 

has been placed on the sur-

face that is considered the front of the 
stand or relating to special assembly 
procedure in these instructions. 

 

The details pertaining to how the frame 
members fit together is illustrated in 

Detail A

. Always slide the rail slot into 

the retaining clip as shown. 

 

Frame member 5 and 6 have access 
holes located in the slot. 

Make sure 

that the hole lines up with the screw 
head

. You will be able to see the screw 

head by looking through the access 
hole. When the two are aligned, place 
hex key (allen wrench) into hole and 
tighten screw.  

 

Assemble as shown: first assembling 
lower moving frame rail ( 

5 - Orange 

and then upper moving frame rail (

6 - 

Dark Blue 

) to sliding frame verticals (

- Black and 3 - Light Blue

). 

The pull 

pins are on the back side. Also, note 
that  the lower moving frame rail ( 5 ) 
has two large holes on one side. This 
is the backside. The upper rail ( 

has four holes on one side. This is the 
front side of the rail. 

Attach this rail 

second, positioned as shown. 

 

 

Finally attaching the lower horizontal 
member ( 

4 - Red 

) to frame verticals 

2 and 3 

) with a screw ( 

14 

) and 

15 

14 

Detail A 

Summary of Contents for IW77









Reviews: