NEC ITL-8LD-1 - DT730 - 8 Button DESI Less Display IP..., User Manual

Page: 151 / 272

143
DIAL INTERCOM
To Initiate
STEP 1: Lift handset or press the key.
STEP 2: Press DICM key.
STEP 3: Dial desired intercom station number. Re-
ceive ringback tone.
To Answer
STEP 1: DICM LED flashes, indicating an incoming in-
tercom call.
STEP 2: Press DICM .
STEP 3: Lift handset or press key. LCD shows
solid green.
STEP 4: If called station is engaged in a non-intercom
call, the station may press DICM after placing
the original call on hold (with key.)
To Bridge Into A Dial Intercom Call
STEP 1: Press the DICM key, lift handset or press
key.
STEP 2: A three-party conference is established.
DT730/710 DT330/310
Speaker
Called party
ICM 2
1:25 PM MON 12 JUL 2010
Speaker
HOLD
Calling party
ICM 2
1:25 PM MON 12 JUL 2010
Note:
Bridging is an optional feature.
Note: Dial intercom provides a Dial Intercom group
where each member of the group may be called
by a 1- or 2-digit number without using their
prime lines.
Speaker
Overriding party
OVERRIDE 3
1:25 PM MON 12 JUL 2010
CONF
1:25 PM MON 12 JUL 2010