NEC ITL-12D-1 - DT730 - 12 Button Display IP..., Quick Start User Manual

Page: 27 / 70

19
TO MAKE AN EXTERNAL CALL
When dialed telephone number is registered in Per-
sonal Directory, the corresponding name information
will be displayed on LCD of DT730 Series while you
are hearing a ringback tone or are engaged in a con-
versation. According to the initial settings, the display
may differ from the following examples. For more infor-
mation, contact the system administrator.
Lift handset or press key, receive dial tone.
Dial the Central Office access code, e.g. 9 .
Dial desired telephone number.
(while hearing a ringback tone)
Use handset or MIC to start a conversation.
Display indicates:
(while in a conversation)
• When dialed number is registered in Personal Directory
• When dialed number is not registered in Personal Direc-
tory
Note:
Personal Directory Name Display function is
available only for DT730 Series.
Note: This section describes the Normal Dial Mode.
DT730/710 DT330/310
Speaker
1:25 PM TUE 18 MAR 2008
MIC DND >>>
31313
Station Number
of My Line
1:25 PM TUE 18 MAR 2008
MIC DND >>>
9
Dialed Code
Note:
In the above case, a maximum of eight digits of
the number (including “*”) can be displayed. If the
dialed number exceeds eight digits, “the first
seven digits of the *” or “the last seven
digits of the *” are displayed. For more
information, please contact the system adminis-
trator.
1:25 PM TUE 18 MAR 2008
9XXXXXXXXX
MIC >>>
Dialed Code + Number
9XXXXXX*
00:05
Elapsed Time
TOM JONES
MIC DND >>>
Dialed Code
Name Information
registered in
Personal Directory
+ Number