User’s Manual U13390EJ2V0UM
5
Major Revisions in This Edition
Pages
Description
Throughout
•
Addition of IE-78K0S-NS-A as supported main board
•
Addition of NP-H44GB-TQ as emulation probe
•
Addition of TGB-044SAP as conversion socket/adapter
•
Deletion of NP-42CU from supported emulation probes
pp.12, 13
Figure 1-1 System Configuration
•
Change of supply medium for debugger ID78K0S-NS to CD-ROM
•
Change of
Notes 1
to
3
.
p.15
Modification of a part of
Table 1-1 Basic Specifications
pp.20 to 22
3.2.1 Overview of clock settings
•
Change from “internal clock” to “clock oscillator”
•
Addition of V
SS
pin in
(a) Clock oscillator
in
Figure 3-2 External Circuit Used as System Clock
Oscillator
•
Change from “resonator” to “clock oscillator or external clock” on target system in
Figure 3-3 When
Using Clock (6 MHz) That Is Already Mounted on Emulation Board
and
Figure 3-4 When Using
User-Mounted Clock
•
Change from “clock generator” to “external clock” in
Figure 3-5 When Using an External Clock
p.29
Addition of
3.3 Setting Power Supply Voltage of Target Interface
p.30
Addition of
3.4 External Trigger
p.31
3.5 Switch and Jumper Settings
•
Addition of
(2) Switch and jumper settings on IE-78K0S-NS-A
p.36
Addition of
APPENDIX B CAUTIONS ON DESIGNING TARGET SYSTEM
The mark shows major revised points.
