CHAPTER 2 NAMES AND FUNCTIONS OF PARTS
User’s Manual U11595EJ5V0UM
25
2.1.2 Names and functions of pod part
Figure 2-3. Pod (Top View)
MM1 MM2
Emulation CPU
MM3
OSC
TRG
GND
JP1
JP2
CKSEL (green)
TARGET (yellow)
POWER (red)
SW1
SW2
External logic connector
MODE3 (green)
L
E
D
A1
OFF
ON
OFF
ON
EEPROM™
A1 pin direction mark on the Emulation CPU
GND pin
TRG pin
Pin 1 direction mark of connector
for target connection
JP4
1
3
(1) TRG pin
The trigger signal output pin
(2) GND pin
The GND pin used during trigger signal output
(3) External logic connector
Connects the external logic probe (included).
(4) Crystal oscillator (OSC)
A 6.667 MHz crystal oscillator is installed when shipped from the factory. This socket-mounted oscillator can
easily be replaced. Clock supply using the crystal resonator of the target board is not supported, so be sure to
use a clock oscillator to supply the clock to the X1 pin. (For details, refer to the user’s manual of the option board
used.)
