I-Select TS100 / I-Select TW100 User Guide - Upgrading Your System
4 - 19
10.
Gently apply pressure equally over the top surface of the processor until it seats
in the socket. The processor should fit, do not force the processor into the socket.
Push the socket lever down until it snaps into the locked position.
11.
Install the heatsink proceeding as follows:
■
On one side of the heatsink, insert the metal arm notches into the correspond-
ing slots. Push on the heatsink until the hear a click when the other arm is in
place.
■
Secure the heatsink to the system by pushing the two plastic arms down.
Note:
Make sure that the heatsink is level.
12.
Connect the fan cable to the processor fan connector on the motherboard.
13.
Replace the right side door. See “Replacing the Right Side Door” on page 4-5.
