E-30
USING ON-SCREEN MENU
Basic Menu Operation
Using the Menus
1. Press the MENU button on the remote control or projector cabinet to
display the Basic, Advanced or Custom Menu.
2. Press the SELECT
왖왔
buttons on the remote control or the projec-
tor cabinet to highlight the menu for the item you want to adjust or
set.
3. Press the SELECT
왘
button or the ENTER button on the remote
control or the projector cabinet to select a submenu or item.
4. Adjust the level or turn the selected item on or off by using SELECT
왗
or
왘
buttons on the remote control or the projector cabinet.
The on-screen slide bar will show you the amount of increase or
decrease.
5. Changes are stored until you adjust it again.
ENTER .......... Stores the setting or adjustments.
CANCEL ........ Return to the previous screen without storing settings
or adjustments.
6. Repeat steps 2-5 to adjust an additional item, or press the CANCEL
button on the projector cabinet or the remote control to quit the menu
display.
Customizing the Menu
The Custom menu can be customized to meet your requirements. Se-
lecting a menu item from the "Custom Menu Edit" list, allows you to
custom tailor the menu items to your needs.
1. Select "Custom Menu Edit" to display the "Custom Menu Edit" screen.
2. Use the SELECT
왖
or
왔
buttons to highlight your selection and press
the ENTER button to place a check mark next to an option.
This action enables that feature. Press the ENTER button again to
clear the check box.
If you select an item with a solid triangle
왘
and press the ENTER
button on the remote control or the projector cabinet, you can enable
all the items within that submenu. Also you can turn on an item within
the submenu without placing a check mark on the main menu item.
NOTE:
Up to 12 main menu items (within Custom Menu Edit, not including
submenu items) can be selected.
3. In order for the changes to take effect, use the SELECT
왗
or
왘
but-
ton on the remote control or the projector cabinet to highlight "OK",
then press the ENTER button. To cancel the changes, use the SE-
LECT
왖
or
왔
buttons to highlight "Cancel" and press the ENTER
button.
To return to the factory default, select "Reset" then press the ENTER
button.
The default Custom Menu items are:
Source Select (Video, S-Video, Component, RGB, DVI (DIGITAL) and
Viewer), Volume, Image Options (Aspect Ratio and Zoom Position), Pic-
ture Management, Projector Options (3D Reform, Menu, Setup and
Screen), Tools (Sleep Timer, Capture and PC Card Files) and Help (Con-
tents and Information).
NOTE:
Once you have selected OK on the Custom Menu Edit screen, you cannot
cancel the changes on the Menu screen. However, you can reedit the menu items
over again as described in the steps above.
NOTE:
If the "Advanced Menu" item has been selected on the Menu mode, you
get the "Confirmation Change Menu" upon completion of "Custom Menu" editing.
In this case, selecting "Yes" then "ENTER" will close all the menus and apply the
changes from the Advanced menu to the Custom Menu. If you select "No" then
"ENTER" functions, then all menu items will return to the Advanced menu, but
your changes will still be available within the "Custom Menu" selection. To dis-
play the previously tailored Custom Menu, select "Custom Menu" from the "Menu
Mode".
An item "To Advanced Menu" will be added to the bottom of the Custom
Menu.
Selecting this item and pressing the ENTER button will display the "Ad-
vanced Menu" features.
