LT30 :
firmware version 1.03 or later
NP4000:
firmware version 1.04 or later
NP4001:
firmware version 1.01 or later
NP62 :
firmware version 1.02 or later
======================================================================
5. Command Descriptions
----------------------------------------------------------------------
Precautions with Inscriptions:
(*1) Projector ID
It is the value when forwarding a factory.
This reflects the "Projector ID" that has been set to the projector.
(*2) Model code: "xxH" inscription
This will differ depending on the projector.
In case of MT/NP1000 series
10H
In case of MT/NP3150 series
10H
In case of MT/NP3250 series
10H
In case of LT/LT80 series
20H
In case of NP61, NP62 series
20H
In case of NP216 series
20H
In case of VT series
40H
In case of NP600 series
40H
In case of NP610 series
40H
In case of NP2200 series
40H
In case of M300 series
40H
In case of P420 series
40H
In case of GT series
50H
In case of HT series
60H
In case of WT series
70H
In case of HT10 series
D0H
In case of LT180 series
D0H
In case of LT30 series
D0H
In case of NP60 series
D0H
In case of NP4000, 4100 series
80H
In case of NP905/NP901W/VT800
90H
(*3) Checksum: "CKS" inscription
This is the value of the lower 8 bits of the results calculated in byte units from all of the data up to the immediately
preceding data.
Example:
20H 81H 01H 60H 01H 00H 03H
+ + + + + + = CKS
(*4) Response error number
This is the value of the error number at the time of an error.
See "NAK" of "6-2. Data portion of response".
(*5) Term
“
RGB” and “COMPUTER”
On the HT1100, VT770, LT245/ LT265/ LT280/ LT380, NP1000/NP2000, NP1150/NP2150/NP3150/NP3151W,
NP1250/NP2250/NP3250/NP3250W, NP1200/NP2200, NP4000/NP4001, NP4100/NP4100W,
NP905/NP901W/VT800, LT25/LT30/LT35, VT48/VT480/VT580, VT49/VT490/VT590/VT595/VT695/VT700,
NP300/NP400/NP500/NP500W/NP500WS/NP600/NP600S,
NP310/NP410/MP410W/NP510/NP510W/NP610WS/NP610/NP610S,
NP40/NP50/NP60/NP41/NP61/NP62/NP43/NP64 and P350X/350W/420X, the term "RGB connector" has been
changed to "COMPUTER".
(*6) Term “DVI” and “COMPUTER
”
On the LT380, NP1000/NP2000, NP1150/NP2150/NP3150/NP3151W, NP1250/NP2250/NP3250/NP3250W,
NP1200/NP2200, NP4000/NP4001, NP4100/NP4100W,
NP300/NP400/NP500/NP500W/NP500WS/NP600/NP600S,
