3
INSTALLATION
AFTER MOVING THE SET
If the used set is moved or placed in a different direction, the MAIN
ON/OFF button must be switched off for at least 15 minutes in order
to take out a colour strain on the screen.
INSERTING BATTERIES INTO THE REMOTE CONTROL UNIT
Press down the battery compartment grip and slide the cover. Insert
the batteries supplied(two 1.5V, type AA).
Make sure that the polarity matches with the (+) and (-) marks inside
the battery compartment.
Used batteries should be disposed of properly.
AERIAL CONNECTION
For better picture and sound quality, an effective aerial installation is most
important.
If you are located in a relatively strong signal area, you will be able to use
the indoor aerial.
When using an outdoor aerial, it is usually connected to the set by means
of 75 ohm coaxial cable.
