9
SLEEP
(figure 10)
By pressing the SLEEP button repeatedly, you can select one of the
following settings:
00:00 00:20 00:40 01:00 01:20 01:40 02:00
The set will be turned off after the time you selected.
Automatic Switch-Off in No broadcast Signal
If a broadcasting signal is not present for about 30 minutes, the set will
automatically turned off.
In AV mode, however, this function does not operate.
RECALL
The RECALL button is used to display the current status: programme
number, station name, clock and system(right above).
This display appear for about 5 seconds unless a button is pressed.
CHILD LOCK
You can prevent the use of the TV set without the remote control unit.
Press the RED(skip), GREEN(move), YELLOW(delete), and POWER
button in sequence on the remote control unit within 5 seconds. Then
The TV set will be child-locked.
The child-lock function is indicated by a blinking STAND-BY INDICA-
TOR.
The set can only be switched back by using the remote control unit.
Note that Child-Lock function is prior to Wake up function.
In the MAIN MENU, Select TIMER menu.
SETTING THE CLOCK
Press the RIGHT button on the CLOCK line.
Set the hours and minutes with the UP/DOWN buttons(CH
V
/
W
).
The clock will start.
Note that if you turn the TV off the with MAIN ON/OFF button or press
the CYAN(mode) button, the clock setting is lost and must be reset if
necessary.
SETTING THE WAKE UP TIME (figure 9)
Set Wake up time in the same way as SETTING THE CLOCK above.
Set Timer “YES” or “NO” with the LEFT/RIGHT buttons(VOL
C
/
B
).
When Timer is “YES”, the function is enabled.
When Wake up time is operated, the set will switch on to this pro-
gramme number at the set time.
TIMER
Menu
Picture
Timer
Language
Install
Position
Return
Cursor
[Figure 9]
Clock --:--
Timer No
Wake up Time
--:--
Wake up Prog.
Pr--
M
Pr02 -----
Sleep 00:00
Auto
[Figure 10]
