NEC ExpressCluster SRE, Installation And Configuration Manual

Page: 9 / 129

9
Chapter 3: Configuration (Windows 2003)
This chapter describes the one-time initial configuration procedure for NEC
ExpressCluster SRE in the final deployment environment.
Computer Name Configuration
The computer name MUST be finalized before starting configuration of NEC
ExpressCluster SRE.
If the computer name (as shown by running the “hostname” command) is changed
from the factory setting then you MUST perform the following step:
Step 1
Start the command prompt (using Start-> Command Prompt) , type in the
following command and hit
<Enter>
:
C:\Program Files\NEC ExpressCluster\tools\sreprep
The command will complete silently and no user input is required.
Default Loopback Adapter IP addresses
Following IP addresses are assigned as default addresses to the Loopback
Adapter:
1.
IP: 10.123.187.1 Subnet: 255.255.255.0
2. IP: 192.168.93.1 Subnet: 255.255.255.0 (To be used as the Primary
Interconnect IP address)
If you need to modify these IP addresses, please refer to Appendix A: Modifying
IP Addresses
Register License
Step 1:
Start
“License Manager”
from
Start->All Programs->NEC ExpressCluster
Server -> License Manager .