1. Installing Internal Optional Devices
Express5800/T110g-S User’s Guide
81
Chapter 2 Preparations
Install a 2.5-inch HDD cage in the server by using the following procedure.
See
Chapter 2 (1.3 Overview of Installation and Removal)
for preparations.
1.
To remove the side cover and the front bezel, see
Chapter 2 (1.4 Removing the Side Cover
and
2.
.
Set the jumper for the backplane board installed in
3.
the HDD cage. The jumper setting when the onboard
SATA controller (LSI Embedded MegaRAID) is used
differs from that when the optional RAID controller is
used. For details, see
Chapter 2 (1.9 Use of Internal
Hard Disk Drives in the RAID System)
.
Mount the rollers that come with the HDD cage on
4.
the holes inside the HDD bay (10 places).
Insert the HDD cage into the HDD bay. The "C side"
5.
must face upward. Do not push the HDD cage to the
end for connecting cables later.