Express5800/320Lb System Release Notes 7
4. Notice when using backup application software
Do not perform "Scan for hardware changes" in the device manager while performing
backup. The backup job may fail if hardware is scanned during the backup process.
5. Connection of 8-port server switch unit (SSU)
Mouse devices and keyboards of other computers connected to the 8-port SSU may
stop responding while the NEC Express5800/ft series server boots or shuts down.
After the NEC Express5800/ft series server is powered up completely, mouse devices
and keyboards will work properly, please wait for approximately 30 sec. in such a case.
Note:
This problem may occur if the FR management
number of the 8-port SSU is 1.2 or earlier. This problem will
not occur on devices where the FR management number is
1.3 or later.
The FR management number is written on the FR management label.
(See below).
Location of FR management label
Back of 8 port server switch unit
FR management label
* X.X is the FR management number.
If there is more then one set of numbers on the FR management
label, the largest number that appears will be the current FR
management number.
X.X
X.X
