NEC EXPRESS5800/120Ld, Service Manual

Page: 120 / 194

4-48 Dissasembly and Reassembly
8. Remove the side panel interlock switch from the chassis. See Figure 4-47.
Figure 4-47. Removing the Side Panel Interlock Switch
9. Remove the Switch Assembly from the system.
10. Install the three switches of the replacement assembly into their appropriate
positions on the mounting bracket.
11. Position the Switch Assembly cables through the cable clamps to the system
board. Install and secure the cable clamps as required.
12.
Connect the Switch cable to the system board. See Figure 1-5, G.
13.
Secure the Switch Assembly mounting bracket to the front of the chassis
using the two screws remove in Step 5. See Figure 4-43.
14. Install the side panel interlock switch to the chassis. See Figure 4-47.
15. Install the left side panel and the front door.
16. Connect the ac power cord and power up the system.