![background image](http://html1.mh-extra.com/html/nec/express-5800-tm700/express-5800-tm700_user-manual_3922567082.webp)
TM700 User Guide - Upgrading Your System
4 - 22
up. If the HDD bracket is correctly inserted, the top and back of the HDD and
3.5/5.25-inch bracket should fit squarely together.
11.
Secure two screws in the screw holes
(B)
located on the front of the chassis.
Figure 4 - 20 : HDD Bracket Screws
12.
Secure the screw
(A)
securing the HDD bracket and the 3.5/5.25-inch bracket
together.
Figure 4 - 21 : HDD Bracket Screw
13.
Connect the DATA and power cables to their respective hard disk drives.
See
“Preparing the Device” on page 4-37.
14.
Replace the front panel.
15.
Replace the right side door.
Note:
Modify the BIOS Setup program to automatically
recognise the hard disk drive. For additional information, refer
to the BIOS Setup chapter.
Summary of Contents for Express 5800 TM700
