NEC Express 5800 TM700, User Manual

Page: 50 / 132

TM700 User Guide - Configuring Your System
3 - 6
IDE Configuration Submenu
DMA Mode Auto
SWDMA0
SWDMA1
SWDMA2
MWDMA0
MWDMA1
MWDMA2
UDMA0
UDMA1
UDMA2
UDMA3
UDMA4
UDMA5
UDMA6
Selects the DMA mode used for
moving data to/from the drive.
This field is informative only for
Type Auto.
SMART Monitoring Auto
Disabled
Enabled
Enables or disables the Self
Monitoring, Analysis and
Reporting Technology
(S.M.A.R.T.)
32Bit Data Transfer Disabled
Enabled
This option allows you to
enable or disable 32 bit IDE
transfers.
Table 3 - 1: IDE Configuration Submenu
Feature Choices or
Display Only Description Your Setting
Onboard IDE
Operate Mode
Compatible Mode
Enhanced Mode
Set this feature to Compatible
Mode when using a legacy
operating system (i.e. Windows
98, Millennium, NT).
Set it to Enhanced Mode when
using native operating system
(i.e. Windows 2000 or XP)
Enhanced Mode
Support On
P-ATA+S-ATA
S-ATA
P-ATA
Leave this feature set to default
S-ATA to be able to use the
EXPRESSBUILDER or CD
Configure S-ATA as
RAID
No
Yes
Allows you to configure S-ATA
channels to function either as
standard IDE or as RAID.
See RAID Application
documentation for details.
Serial-ATA
BOOTROM
Disabled
Enabled
Only if Configure S-ATA as
RAID is set to Yes .
Allows you to enable or disable
the S-ATA boot ROM.
IDE Detect Time
Out (Sec)
0, 5, 10, 15, 20, 25,
30, 35
Allows you to set the time out
value for detecting ATA/ATAPI
devices.
Table 3 - 4: Primary And Secondary Master And Slave IDE Submenus (Continued)
Feature Choices or
Display Only Description Your Setting