BMC Configuration User’s Guide
5.4
Restore
Restore the system information from files. Select the restore target and click [OK].
Item
Description
File Locations
Set the locations of file.
Backup File
The backup file is displayed.
Browse
It changes the backup file.
Restore Target
Select the restore target.
FRU Information
Select whether restore FRU Information or not. Only when the target
information exists in the file, you are able to select this item.
include UUID
When you restore FRU Information, select whether restore UUID or not.
Only when FRU Information is selected and the target information exists in
the file, you are able to select this item. *1
BIOS Information Select whether restore BIOS Information or not. Only when the target
information exists in the file, you are able to select this item.
BMC Information Select whether restore BMC Information or not. Only when the target
information exists in the file, you are able to select this item.
*1: When you restore UUID, BMC will be reset. In this case, it will take a few minutes to restart BMC.
To reflect the setting, it is necessary to reboot the server.
IMPORTANT:
This operation may cause data destruction. Other than the maintenance person, please do
not run.
False HW error information may be detected on the server if Shutdown, Reboot, or any
other operation is executed during a few minutes after this operation. Please refer to the
server's User's Guide to get more information, because the occurrence of the false HW error
detection depends on the model of the server.
CHECK:
You need backup file in the Backup function.
Off-line TOOL has no restore function.