NEC Express 5800/320Fd, Read Me First

Page: 12 / 26

-8-
Tools Needed to Unpack the Cabinet
Use the following tools to unpack the cabinet:
•
Metal shears to cut pallet straps
•
Pair of scissors or utility knife
•
One 3/8-inch drive ratchet with a 9/16-inch socket
Removing the Packing Materials
W A R N I N G
!
To avoid personal injury or damage to the
systems or cabinet, two persons are required
to perform the following procedures.
1. Orient the cabinet package so that the package and the ramp
have, as a minimum, the clearance shown in
Figure 4 . Also,
verify that you have enough clearance above the cabinet to
remove the top cardboard cap.
2. With one person holding the ramp in place, use the metal
shears to cut the exterior shipping straps. To avoid injury while
cutting each strap, hold the strap firmly with one hand as you
stand away from it. See
Figure 5 .
W A R N I N G
!
The shipping straps can snap with
considerable force when they are cut. To avoid
eye or skin injuries, use caution when cutting
the shipping straps.