9-58 Upgrading Your Server
13.
Connect the SATA cable provided with the HDD cage, I2C cable, and power cable as
shown in the figure below.
14.
Connect the SATA cable to the RAID board (SATA).
A label indicating a channel number of destination port is attached to SATA cable.
Connect the SATA cable to the port (connector) having the same number as that of SATA
cable.
NOTE:
The figure below shows an example when connecting to
N8103-101 RAID board. The location of connector and assignment of
channel numbers depend on the board. Refer to the manual that comes
with your board.
SATA cable
I2C cable
(4-pin connector)
Power cable
(4-pin connector)
Summary of Contents for Express 5800/120Eh
