NEC Express 5800/120Eh, User Manual, Page: 121 / 342

Installing the Operating System with Express Setup 5-9
Installing the Windows Server 2003
Express Setup proceeds the setup by specifying the necessary information on the wizard. You can
also save the setup information created on the wizard in a floppy disk as a setup file.
NOTES:
„
Prepare a floppy disk to use as Configuration Disk if you want to
save the parameters or use the drivers located on the "OEM-Disk
for Mass Storage Device" that ships with optional boards. When
using the floppy disk, the Express setup can continue the setup
without specifying the parameters.
„
On remote KVM console, you cannot use the mouse in Procedures
1 through 15. Use the keyboard.
→
: Used to move to the next screen.
←
: Used to return to the previous screen.
↑ ↓
: Used to select a menu.
F1 : Displays help.
ENTER : Used to select [OK] or to decide each item.
ESC : Used to select [Cancel].
1.
Turn the power of peripheral device on, and then turn on the server.
NOTES:
„
Do not mount an MO device on your server during the Windows
installation.
„
Do not connect the other hard disk drives except the drive that you
want to create as the Windows system drive.
„
If you create multiple logical drives in your system, refer to
"Reinstalling the operation system when multiple logical drives
exist" (Appendix E).
2.
Insert the NEC EXPRESSBUILDER CD-ROM into the DVD-ROM drive of the server.
3.
Press Ctrl , Alt , and Delete to reboot from the NEC EXPRESSBUILDER.
The system boots from the CD-ROM and NEC EXPRESSBUILDER starts.
4.
Click [Express Setup].
5.
The message, "Do you want to use the parameters file in order to set up the Express server
or workstation?", appears.
If you want to use the parameters file, click [Yes].
If not, click [No].