NEC EXP320P User Manual Download

Page: 38 / 89

3. Standard Features

Express5800/R320c-E4, R320c-M4 User's Guide

Chapter 1 General Description

3.3

Management Features

NEC ESMPRO Agent

, which is provided in EXPRESSBUILDER(Windows) or in ft Control Software Install

DVD(VMware), enables you to collectively manage the state of your systems. You can also monitor the server
states from a management PC on network where

NEC ESMPRO Manager

is installed.

The features available on this server are as shown in the table below.

Function Availability

Description

Shows physical hardware information.

Memory bank

△

Shows physical memory information.

Device info

△

Shows information specific to the server.

Hardware

CPU

△

Shows physical CPU information.

System

○

Shows logical CPU information and monitors the load factor.

Shows logical memory information and monitors the status.

I/O device

○

Shows information on I/O devices (serial ports, keyboard, mouse,

and video).

Monitors temperatures, fans, voltage, power supply, and others.

Temperature

△

Monitors the temperature inside of the chassis.

Fan

△

Monitors the fans.

Voltage

△

Monitors the voltage inside of the chassis.

Power supply

△

Monitors the power supply unit.

System

environment

Cover / Door

Ｘ

Monitors Chassis Intrusion (open/close state of chassis cover or

door).

Software

○

Shows service, driver, and OS information.

Network

○

Shows network (LAN) information and monitors packets.

BIOS

△

Shows BIOS information.

Local polling

○

Monitors the values of MIB items obtained by NEC ESMPRO

Agent.

Storage

Monitors controllers and storage devices including hard disk

drives.

File system

○

Shows the file system configuration and monitors the free space.

△

Monitors OS stall using the Watch Dog Timer.

Others*

△

Performs alert processing after an OS STOP error occurs.



: Supported.



: Windows Only supported.



: Unsupported.

*: Not displayed on the NEC ESMPRO Manager screen.

Tips

NEC ESMPRO Manager and NEC ESMPRO Agent are supplied with the server as

standard. For how to install and use each software component, refer to the

explanation of the component.

Summary of Contents for EXP320P


























































































Search results

Summary of Contents for EXP320P

Reviews:

Related manuals for EXP320P

Brands by name

Popular brands

NEC EXP320P, User Manual

Search results

Summary of Contents for EXP320P

Reviews:

Related manuals for EXP320P

Brands by name

Popular brands