NEC DV11G, User Manual

Page: 10 / 22

E-10
Back Panel
1 2 3 4 5 6 7 8
RS-232C Terminal
Use this terminal when controlling
this equipment from a PC.
USB Port
Use this terminal when taking the contents of
image memory of this equipment into a PC.
RGB Input Terminal (RGB-IN)
(mini D-sub, 15-pin)
Connect the RGB signal cable when projecting
images from an external image equipment via
this equipment.
Video Image Output Terminal (VIDEO OUT)
Connect a video cable when displaying images
from this equipment on a TV monitor or the like.
Power Switch
AC IN Terminal
Connect the power cord.
RGB Monitor Output Terminal 1 (RGB-OUT 1)
(mini D-sub, 15-pin)
Connect the RGB signal cable when outputting
images from this equipment to a projector or the
like by RGB output.
S-video Image Output
Terminal
(S-VIDEO OUT)
Connect an S-video cable
when displaying images
from this equipment on a
TV monitor or the like.
6 5 4 3 2 1
OFF
ON
8 7
MONITOR Output Terminal
Always displays camera image.
Built-in
Security Slot (
) *
RGB Monitor Output Terminal 2 (RGB-OUT 2)
(mini D-sub, 15-pin)
Always outputs images from the RGB input termi-
nal.
Same output as the RGB monitor output terminal 1
may be produced by Dip switch 5 setting.
* This security slot supports the MicroSaver
®
Security System. MicroSaver
®
is a registered trade-
mark of Kensington Microware Inc. The logo is trademarked and owned by Kensington Microware
Inc.
Dip Switches
These switches set the output mode of this equip-
ment. The settings become effective at power on.
Flip the switch up or down, using the tip of a
ballpoint or similar tool.
Dip switches 1 and 2
These switches set the resolution of RGB output.
SW1
SW2
ON ON 1024
ⴒ
768 (XGA)
ON OFF 800
ⴒ
600 (SVGA)
OFF ON 640
ⴒ
480 (VGA)
OFF OFF 1024
ⴒ
768 (XGA)
Dip switch 3
This switch selects a signal system outputted from
the Video image output terminal, S-video image
output terminal or Monitor output terminal.
ON
NTSC
OFF PAL
Dip switch 4
This switch switches between RGB output and
Video output.
ON
Video
OFF RGB
Dip switch 5
This switch sets output of the RGB monitor out-
put terminal 2.
ON
Outputs the same signal as RGB moni-
tor output terminal 1.
OFF Outputs signals inputted from RGB
input terminal.
Dip switch 6
This switch selects the setting of white balance
to be turned on at power on.
ON
User adjusted value
OFF Factory setting
Dip switches 7 and 8
Not used.
Items in a ruled box ( ) indicate factory default settings.