NEC DTL-8LD-1 Quick Start User Manual Download Page 26

Page: 26 / 70

TO LOGIN

When login mode is activated, the telephone
prompts for Login ID and Password.

Enter login code and press

Set

soft key.

(Station number is used as the Login code.)

Enter the password and press

Soft key.

If the login code is accepted, display changes to
normal idle status.

TO LOGOUT

Press the preassigned

Logout

Feature Key on the

terminal.

“

LOGOUT?

” is displayed on the LCD of the termi-

nal.

Press the

Logout

Feature Key on the terminal

again.

Note:

This feature is only available for DT700 Series.

DT730/710

Cancel Back Set OK

Password

Login ID :

Cancel Back Set OK

Password

Login ID :

2000

Cancel Back Set OK

Password

Login ID :

2000

*****

MIC DND >>>

7:25 AM MON 18 JUL 2008

Note:

This feature is only available for DT700 Series.

Note:

The soft key location is an example.

Note:

Logout button is assigned by data setting at the
ECP (Enterprise Communication Platform).

DT730/710

MIC DND >>>

7:25 AM MON 18 JUL 2008

L-OUT >>>

LOGOUT ?

Summary of Contents for DTL-8LD-1







































































Search results

Summary of Contents for DTL-8LD-1

Reviews:

Related manuals for DTL-8LD-1

Brands by name

Popular brands

NEC DTL-8LD-1, Quick Start User Manual

Search results

Summary of Contents for DTL-8LD-1

Reviews:

Related manuals for DTL-8LD-1

Brands by name

Popular brands