NEC Dterm DTL-8R-1, Owner'S Manual

Page: 29 / 72

D
term
Cordless DECT Document Revision 1
Owner’s Guide 3 - 5
___________________________________________________________________________________
___________________________________________________________________________________
3. Place the AC adapter cord inside the molded channel of the wall mount
stand.
4. Plug one end of the short telephone cord (locally supplied) in the LINE
jack on the base unit. Plug one end of the NEC digital multiline
telephone into the
PHONE jack. Place the telephone cords inside the
molded channels on the bottom of the wall mount stand.
5. Plug the other end of the short telephone cord into the modular wall jack
in the center of the wall plate.
6. Place the base unit on the posts of the wall plate and push down until it
is firmly seated.
Figure 3-6 Placing the AC Adapter Cord Inside the Wall Mount Stand
Figure 3-7 Placing the Base Unit on the Posts of the Wall Plate
Dterm Cordless DECT.book Page 5 Friday, December 7, 2007 3:48 PM