NEC DT930 Series, User Manual, Page: 123 / 186

109
1.
Making a Call
This section explains Preset Dialing. Before making a
call, the terminal user can verify the dialed number
displayed on the LCD. When a wrong number is
entered, the user can correct the number before
originating the call.
To Make an External Call
The following explains how to make an external call.
(1) Dial the Central Office access code, then the
desired number.
(2) Press the
Speaker
key.
❍
Place the call.
❍
Speaker key lamp lights Red.
To Make an Internal Call
The following explains how to make an internal call.
(1) Dial the desired number.
(2) Press the
Speaker
key.
❍
Place the call.
❍
Speaker key lamp lights Red.
Answering a Call
The following explains how to answer a call with the
Answer key.
To Answer an External Call
(1) You hear the ringing tone.
The Call Indicator Lamp flashes red.
The Line key lamp lights red.
(2) Press
Answer
key.
The Call Indicator Lamp goes off.
The Speaker key lamp lights red.
The Line key lamp lights green.
(3) Lift the handset to answer the call.
To Answer an Internal Call
The following procedure explains how to answer an
external call.
(1) You hear the ringing tone.
The Call Indicator Lamp flashes red.
The Line key lamp lights red.
(2) Press
Answer
key.
The Call Indicator Lamp goes off.
The Speaker key lamp lights red.
The Line key lamp lights green.
(3) Lift the handset to answer the call.
Holding a Call (Using Call Hold)
This feature allows a terminal user to hold a call in
progress by pressing the Call Hold key. This line can
then be used for originating another call or returning to
a previously held call.
A call can also be answered by pressing the
Line key that is flashing instead of the Answer
key.
Or, a call can be answered by lifting the
handset and pressing the Answer key or Line
key.