NEC DT930 Series, User Manual, Page: 104 / 186

90
1.
Setup with Menu Key
Enable/Disable Off-Hook Ringing
The procedure below shows how to enable/disable Off-
hook ringing.
(1) Display the
Menu
screen, select
Settings
.
(2) Select
User Settings
.
Select an item by one of the following operations.
❍
Highlight an item by using , and press ,
or
OK
.
❍
Press .
(3) Select
Incoming Call
.
Select an item by one of the following operations.
❍
Highlight an item by using , and press ,
or
OK
.
❍
Press .
(4) Select
Offhook Ring
.
Select an item by one of the following operations.
❍
Highlight an item by using , and press ,
or
OK
.
❍
Press .
(5) To disable/enable the off-hook ringing, choose
Disable
or
Enable
.
Select an item by one of the following operations.
❍
Highlight an item by using , and press or
OK
.
❍
Press or , and press or
OK
.
To Set Ringing of Headset
The procedure below shows how to enable/disable the
ringing of headset.
(1) Display the
Menu
screen, select
Settings
.
(2) Select
User Setting
s.
(3) Select
Incoming Call
.
(4) Select
Headset Ring
.
(5) To disable/enable the ringing of headset, choose
Disable
or
Enable
.
1
1
1
1
1
1
1 2
1 2
TIP
Default setting is
Enabled
.
TIP
The enabled item is highlighted.
This feature is required for both terminals and
system settings during initial installation. For
details, contact the system administrator.
Tone Type 1 – Tone Type 8:
In the preview function, each ringer tone sounds
continuously. However, when “
Automatic” is
selected, each ringer pattern of internal and
external incoming calls is set by the initial system
settings. For details, contact the system
administrator.
When selecting “ Automatic”, the preview
function is not supported. Use the Feature key
to enable this function.
1
1
2
1 2
0
0