13
1. What’s in the Box? and the Names of the Projector Parts
1-3-3. Lamp power supply (NC-32PS01)
2
3
5
4
1
(Rear)
6
1. Air outlet
This exhausts heat from the lamp power supply.
2. Main power switch
This is the main power switch for the lamp power supply.
3. AC power cable
The AC power cable is not an accessory. Request service personnel to connect the power cable.
4. Two lamp power cables
These connect to the lamp power supply input terminals of the projector. Request service personnel to connect the power
cable.
5. Control terminal (Dedicated interface cable)
This connects to monitor the status of the lamp power supply from the projector head.
6. Air inlet
Outside air is taken in here to lower the temperature inside the projector. Do not cover this inlet.
NOTE
• Do not touch the air outlet and backside of the main unit when your projector is operating. Otherwise, the high
temperature may cause burns.
• Do not cover the air inlet and outlet during operation. Inadequate air intake may lead to a rise in inside
temperature, thus causing a free or serious projector failure.
Summary of Contents for DLP Cinema NC3200S
Page 4: ... Important Information MEMO ...
Page 69: ... MEMO ...