NEC DLP Cinema NC3200S User Manual Download Page 11 | Manualshive

Page: 11 / 70

background image

11

1. What’s in the Box? and the Names of the Projector Parts

9. Air inlet (for cooling the lamp)

The air inlet for cooling the lamp. Do not cover.
An air filter is attached over the air inlet to prevent dust. Refer to “5-3. Replacing the Air Filter” (page 44) on how to replace
the air filter.

10. Air inlet (for cooling the projector electric circuits)

The air inlet for cooling the projector electric circuits. Do not cover.
An air filter is attached over the air inlet to prevent dust. Refer to “5-3. Replacing the Air Filter” (page 44) on how to replace
the air filter.

11. Lens (optional)

Images are projected from the lens. Request your dealer/distributor to install or replace the lens.

12. Interlock connector (Inside front of projector)

This is the connector for the projector safety device. This is used to control the projector from an external source. Consult
with your dealer/distributor about using this.

13. Conversion lens stay fittings

Fittings to attach the fixing stay when using the optional conversion lens (anamorphic lens or wide converter lens). Contact
your dealer/distributor for more information on the conversion lens and fixing stay.

14. Dedicated interface cable

This is the interface cable that connects with the lamp power supply.

15. AC power cable (For projector)

This is the cable that supplies AC power to the projector head. The AC power cable is not an accessory. Consult with your
dealer/distributor about the AC power cable.

16. Conversion lens stage connector terminal

The terminal to connect the control connector of the conversion lens table when using the optional conversion lens (anamorphic
lens or wide converter lens). Contact your dealer/distributor for an installation of the conversion lens.

NOTE

Do not touch the air outlet and backside of the main unit when your projector is operating. Otherwise, the high
temperature may cause burns.

«
...
9
10
11
12
13
...
»

Summary of Contents for DLP Cinema NC3200S







































































Reviews:

No comments

Related manuals for DLP Cinema NC3200S

Brand: Samsung Pages: 32

Brand: Samsung Pages: 57

Brand: Samsung Pages: 2

Brand: DBPOWER Pages: 30

Brand: Panasonic Pages: 132

PTL711XU - LCD PROJECTOR

Brand: Panasonic Pages: 38

Brand: Panamorph Pages: 2

HQ-Power VDPLPS36B

Brand: Velleman Pages: 26

Innovative Technology XT50

Brand: Eaton Pages: 8

Brand: Targa Pages: 228

Brand: Barco Pages: 2

OutStanding Screens OSS Drive-in 16

Brand: LAWSON PHILIPS Pages: 2

Brand: ACCO Brands Pages: 38

Brand: promethean Pages: 58

Brand: Eiki Pages: 83

Brand: Navitar Pages: 1

Brand: Hitachi Pages: 4

Brand: Hitachi Pages: 22

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands