NEC DLP Cinema NC2043ML User Manual Download Page 66

Page: 66 / 82

6. Appendix

6-2-6. STATUS indicator

SYSTEM status indicator

LIGHT status indicator

SYSTEM status indicator

Indicator condition

Projector condition

Note

Off

Main power is off.

Blinking light

Green

The projector is getting ready to turn on.
The douser is closed.
The light is off.

Wait for a moment.

Orange

The projector is cooling down.

Wait for a moment.

Red (With buzzer)

Safety problem, error.

An error message is displayed in the
LCD screen.
Check the content of the error.

Red (Without buzzer)

Error with possible image project under certain
conditions.

Steady light

Green

The projector is turned on.

Orange

The projector is in standby.

Red

Error at a level with not affect on projection.

An error message is displayed in the
LCD screen.
Check the content of the error.

LIGHT status indicator

Indicator condition

Projector condition

Note

Off

The light source is off.

Steady light

The light source is on.

Summary of Contents for DLP Cinema NC2043ML



















































































Search results

Summary of Contents for DLP Cinema NC2043ML

Reviews:

Related manuals for DLP Cinema NC2043ML

Brands by name

Popular brands

NEC DLP Cinema NC2043ML, User Manual

Search results

Summary of Contents for DLP Cinema NC2043ML

Reviews:

Related manuals for DLP Cinema NC2043ML

Brands by name

Popular brands