manualshive.com logo in svg

NEC DIRECTION SP - SERVICE, User Manual

Share
Download
NEC DIRECTION SP - SERVICE User Manual Download Page 134

    

 7-8   24-Hour Information Services

„

Printer

„

Notebook.

 You should provide as much specific information about
your questions as possible. Also, if you are sending a fax,
please include your voice telephone number and your fax
number with the question. You will receive a response to
your questions within one business day.

NEC CSD TECHNICAL SUPPORT SERVICES

 NEC CSD also offers direct technical support through its
Technical Support.

 Direct assistance is available 24 hours a day, seven days a
week. Call NEC CSD Technical Support, toll free, at

1-888-632-2678

 (U.S. and Canada only).

 Free technical support for hardware is limited to the length
of the standard warranty. Software support for pre-loaded
software is limited to 90 days from the time of the first call
to NEC CSD Technical Support. Get software support after
the initial 90 days or hardware support after the warranty
period for a fee.

 Please have available your system’s name, model number,
serial number, and as much information as possible about
your system’s problem before calling.

 For assistance outside the U.S. and Canada, please contact
your local NEC CSD sales provider.

Summary of Contents for DIRECTION SP - SERVICE
































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands