manualshive.com logo in svg

NEC DIRECTION SP - SERVICE, User Manual

Share
Download
NEC DIRECTION SP - SERVICE User Manual Download Page 101

    

 Installing Options   5-17

 Your system automatically detects the memory at bootup.

DATA STORAGE DEVICES

 The system board in your computer supports the following
storage devices:

„

two diskette drives, including the standard 1.44-MB
diskette drive and a tape backup unit

„

up to four IDE drives.

 

!

CAUTION

 Reduce static discharge by touching the system's
metal chassis.

Locating Device Slots

 Your computer has seven storage device slots:

„

a 3.5-inch accessible device slot contains the standard
1.44-MB diskette drive

„

one internal 3.5-inch hard drive slot for the standard
hard drive; a second 3.5-inch internal hard drive slot is
available

„

four accessible device slots

 

one accessible 5.25-inch device slot containing the
standard CD-ROM/DVD drive

 

one accessible 5.25-inch device slot

 

two accessible 3.5-inch device slots. (The lower
3.5-inch slot is not accessible in the desktop model.)

Summary of Contents for DIRECTION SP - SERVICE
































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands