NEC DB500 Manual Download Page 17

Page: 17 / 59

Checking the battery

Check icon at the bottom of the screen. The blocks on the display show the charge of your battery pack.

Full battery power

Low battery power

Low battery alarm

When the battery voltage falls below the working level,

Recharge Battery

is displayed on screen along with a flashing empty battery

icon and a warning tone. The phone will automatically power down shortly afterwards.

Changing the battery

Make sure the phone is switched off. Some settings may be lost if the battery is removed while the power is on.

Press the catch at the top of the phone

and slide the battery downwards

Place the new battery pack into the slot and slide into place

Charging a battery

The charger unit begins to restore the battery power when it is connected to the phone. Charging takes about one and a half hours with a

standard battery.

Connect the charger plug into the connector at the base of the phone. Check the battery icon is pulsing.

When charging is complete, trickle charging continues. During charging the battery icon pulses and shows as a solid block when charging is

complete. This is also shown when the phone is switched off.

If you need to receive calls, the cellphone can be switched on and left in standby while it is charging, although the total time taken to charge

is then increased.

The cellphone is designed to be charged with the NEC equipment listed with the specifications of your phone.

DO NOT connect a charger or any

other external DC source if the

phone's battery is not inserted.

To cancel the battery alarm, press any key

except

. The low battery alarm will

repeat until the phone automatically

switches off.

It may take a few seconds for the indication

to start.

Using the wrong type of charger can be

dangerous and may invalidate any warranty

and approval given to the

cellphone. Do not connect

more than one charger at

any time. Do not leave the

charger connected to the

mains supply when it is

not in use.

Charger

connector

Summary of Contents for DB500




























































Search results

Summary of Contents for DB500

Reviews:

Related manuals for DB500

Brands by name

Popular brands

NEC DB500, Manual

Search results

Summary of Contents for DB500

Reviews:

Related manuals for DB500

Brands by name

Popular brands