NEC DB500, Manual

Page: 12 / 59

Muting the microphone during a call
*
Press 7 during a call to turn the mute on or off.
Displaying your own phone number
*
Press with the phone switched on and in standby or in a call. This will display the first number stored on the
SIM.
*
Press the or key to select from the list of your own numbers, if applicable.
Sending your own phone number
You can send your own phone number when you make a call so it will be displayed on the phone you are calling (CLI).
*
Press 8 1 3 . Then 1 to turn CLI on or 2 to turn it off.
International dialling codes
When you make an international call from any country, you must start by dialling a special international access code.
Your cellphone has the facility to prefix numbers with a '+' symbol, which saves you entering the access code for the country that you are
calling from.
Your phone will automatically dial the correct numbers for each country if you enter the '+' digit as follows:
Entering international dialling codes
With the phone in standby
*
Hold down 0 . The '0' character displayed changes to a '+' character.
You can then enter the country code, area code, and phone number that you wish to call.
The UK country code is always 44, no matter what country you are dialling from. For example, a typical UK number of 01189 123456 is entered as:
+ 44 1189 123456
International country area phone
access code code number
O
You can enter a number of ‘own phone
numbers’ to allow for voice, data and FAX
calls etc. To enter and/or edit your own
phone numbers, see page 33.
8
MENU
MENU
MENU
MENU
Mute
01234567890
17:10
Mute during call
UK NETWORK
+44118912345
6
11:42
International number
entry