11. At the Set Detailed Parameters for LD
Binding window, the parameters set by
default for the logical disks can be
reviewed or changed if necessary.
To accept the parameters shown, click
Next
, or click
Change
to alter the
displayed logical disk parameters.
12. If the Change button was clicked in the
previous step, the following change
parameters window will be displayed.
The following parameters can be
changed at this point:
•
OS Type
– Sets the appropriate
OS type for the application
server the logical disks will be
bound to. Set to WN for
Windows operating systems.
•
Name
– Changes the name of
the logical disks.
•
Starting LD Number
– Changes
the starting logical disk number.
•
Format Time
– Changes the
maximum amount of time it will
take to bind or rebuild the logical
disks under normal load
conditions.
After the appropriate changes have
been made, click
OK
to return to the Set
Detailed Parameters for LD Binding
window as displayed in the previous
step, and then click
Next
there to
continue.
have
been made, click
OK
to return to the Set
Detailed Parameters for LD Binding
window as displayed in the previous
step, and then click
Next
there to
continue.
NEC D3/D4 Quick Start Guide
45
