2 x 2 mUlti-monitoR installation (K3F220/K3g220) |
11
CHIEF STAND INSTALLATION MANUAL | USER’S GUIDE
Set the Horizontal Position
1.
Loosen the knob
Ⓔ
on the back of the arm for the
left monitor
2.
Move the left monitor so that the edge of the monitor
lines up with the center of the pole
3.
Tighten the knob
Ⓔ
on the back of the arm to fix the
horizontal position
4.
Make sure the monitor does not tilt forward It should
be completely vertical when viewed from the side
If necessary, loosen knob
Ⓓ
and fine tune the
adjustment
iutn:
the instructions in this section are for the
monitors to be set up as a flat surface. instructions for
tilting the monitors are under "adjust tilt / swivel /
Ⓔ
Ⓓ
