3 x 2 mUlti-monitoR installation (K3g320) |
23
CHIEF STAND INSTALLATION MANUAL | USER’S GUIDE
7.
Loosen hex screw
Ⓐ
of the top-center VESA plate
for height adjustment
ⓘ
loosen the hex screw, do not remove it.
8.
Adjust the height of the upper-center VESA plate
Use a ruler to measure the distance from the lower
VESA to set the correct distance based on the
configuration:
•
Monitors with bezels: 196 mm
•
Monitors without bezels: 193 mm
For narrower borders, the upper monitors will need to
be installed rotated 180 degrees. In this configuration,
the distance between the upper and lower VESA
plates will need to be:
•
Monitors with bezels: 193 mm
•
Monitors without bezels: 190 mm
9.
Completely tighten hex screw
Ⓐ
10.
Loosen the knob at the left side of the lower-center
VESA plate
11.
Adjust the tilt angle of the VESA plate parallel with
the stand pole
12.
Completely tighten the knob
Ⓐ
