Chapter 1 : Aspire Conference Bridge PCB
PCB Description
Aspire Conference Bridge Manual
◆
1
Chapter 1 : Aspire Conference Bridge PCB
PCB Description
Chapter 1
DESCRIPTION
The 16CNFU PCB (P/N 0891069) is a conference bridge system designed for the Aspire M/L/XL system. The PCB
is installed in the telephone system and allows up to 16 parties to take part in a conference call. The participants dial
a pre-assigned phone number at the determined time, optionally enter a password, and are prompted to speak their
name which will be announced to the other conference participants. The 16CNFU PCB functionalities include:
●
Password protection is provided for each conference.
●
Applicable voice messages and announcements (e.g., entry, password request, exit) are available.
●
E-mail noti
Þ
cation, when enabled, requires the organizer to enter the E-mail address of each
participant to be sent noti
Þ
cation of a pending conference. This option is selectable when setting up new
conferences.
The 16CNFU E-mail con
Þ
guration supports SMTP mail server ONLY.
●
Host Required, when enabled, requires the host/organizer to be logged into the conference before any
other participant can enter. This option is selectable when setting up new conferences.
●
Admission Control, when enabled, requires the organizer to dial a digit allowing each participant to
enter the conference. This option is prede
Þ
ned access code.
●
One customer greeting can be recorded for each 16CNFU PCB. Prede
Þ
ned password is necessary to
record personal greetings.
●
Password protection option for each conference.
●
Remote conference programming with conference scheduler (via a Web User Interface).
●
Programmable gain adjustments.
●
Support for DTMF detection for manual setup options (Telephone User Interface).
●
HTTP Interface for conference schedule management and conference PCB administration.
The maximum number of 16CNFU PCBs which can be installed depends on the type of NTCPU and PAL chip
used in the Aspire system.
Note that when multiple 16CNFU PCBs are installed, the users in a conference call must all be on the same
16CNFU PCB. A call cannot span multiple PCBs.
Currently, when using PCPro or WebPro, when reviewing the system con
Þ
guration for the cards, the 16CNFU
PCB will be displayed as an ESIU PCB.
NTCPU-A with
Basic PAL Chip
NTCPU-A with
Feature Upgrade
PAL Chip
(Software 6.xx+)
NTCPU-B
16CNFU PCB
4
8
16
