![background image](http://html1.mh-extra.com/html/nec/aspila-ex/aspila-ex_quick-reference-manual_3824274005.webp)
4
11
For Your Convenience
There are 2 levels of Function Keys. (General Keys : assigned by 851, Appearance Keys : assigned by 852)
Appearance Keys have priority. You can overwrite the Appearance Key at the General Key.
If you want to overwrite the General Key at the Appearance Key, you have to erase the Appearance Key by
dialing “852 + 000” before General Key assignment.
In the default setting, Programmable Function Key No. 1 to 12 is assigned as “Trunk” Key. If you want to
assign Function Keys (General) at the unused Trunk Keys, these unused keys should be erased by “852 +
000” operation.
Programmable Function Keys can be erased by dialing “852 + 000” or “851 + 00”.
Program Function Keys
CALL 1
8
Function Key
5
Code + Additional Data
?
?
SPK
1
?
8
5
2
Programmable Function Keys can be assigned as “Trunk” Key and/or other Function Keys. You can just press
the function key to activate the assigned function without dialing the Service Code.
Program DSS Keys (at your Programmable Function Keys)
CALL 1
8
Function Key
5
Programmable Function Keys can be assigned as DSS (Direct Station Selection) or One-Touch Keys. You can
place an Outside / Intercom Call just pressing this key without dialing the number.
1
1
0
Telephone Number
9
Extension Number
?
?
?
HOLD
SPK
In the default setting, Programmable Function Key No. 1 to 12 is assigned as “Trunk” Key. If you want to
assign DSS Keys at the unused Trunk Keys, these unused keys should be erased by “852 + 000” operation
before the above operation.
In case of DSS Key, the extension status can be indicated on the BLF. (idle : extinguished, Busy : lit)
When you register a telephone number, “9” (Trunk Access Code) should be added on top of number.
Up to 24 digits dialing can be registered, but the name can not be registered.
If you want to continue the operation, press Programmable Function Key instead of SPK Key to finish.
?
?
Answering Calls
Answering an Outside Call
(Ringing)
SPK
Trunk Key
(Flashing)
SPK
Ringing
Extension
Non-Ringing
Extension
Answering an Intercom Call
(Ringing)
SPK
Voice Mode
Extension
Ring Mode
Extension
(Voice)
Speak toward
your phone
Intercom Call Mode can be set at your phone by : “Ring” : CALL1 + 823 “Voice” : CALL1 + 821
Confirm the status of MIC Key if you want to answer by Handsfree. (MIC On : Light off, MIC Off : Light On)
Picking up a call for other Extensions
CALL1
System setting is necessary to make Call Pickup Group. Ask your Supplier.
6
8
7
Call Pickup Key
CALL1
?
7
5
?
?
Extension Number
In same
Group
In other
Groups
Pickup for
Specified
Extension
CALL1
6
8
9
Call Pickup for other Group Key
1
(851+24)
(851+25)
Confirm the status of MIC Key if you want to answer by Handsfree. (MIC On : Light off, MIC Off : Light On)