NEC AK-308 User Manual Download Page 11

Page: 11 / 75

Trunk Outgoing Call

Last Number Dialing (LND)

The last telephone number dialed on a trunk outgoing call can be redialed. A maximum of 18 digits is stored.

1. Lift handset or press key.
2. Press a key.
3. Press key.

1. Lift handset.
2.

Dial 04 (or 94).

Dial queuing group number.

-0: Any line
-1-6: Queuing Group 1-6

Saved Last Number Dialing (SLND)

This feature permits saving the last number dialed for redialing at a later time. The saved telephone number
remains in memory until another is stored in it's place.

1. Lift handset or press   key.
2. Press a   key.
3. Press     key and .

Press key.

1. While talking on trunk line.
2. Press key twice before terminating a call.

Press key before terminating a call.

1. Press     key.
2. Press     key and .
3. Press     key.
4. Press     key and .
5. Press     key.

Note : One Touch key #10 is set as SLND key initially.

To place an outside call using

saved last number:

To store dialed number as

saved last number:

To set One-Touch key as

SLND key:

SPK

LINE

LND

SPK

LINE

One-Touch

SPK

∗

One-Touch

OPAC

SPK

To use Last Number Dialing:

Summary of Contents for AK-308












































































Search results

Summary of Contents for AK-308

Reviews:

NEC AK-308, User Manual, Page: 11 / 75

Search results

Summary of Contents for AK-308

Reviews: