1-35
English
English-11
Specifications LCD51VM Monitor
Monitor Specifications
AccuSync LCD51VM Monitor
Notes
LCD Module
Diagonal:
38.1 cm/15 inches
Active matrix; thin film transistor (TFT)
Viewable Image Size:
38.1 cm/15 inches
liquid crystal display (LCD); 0.297 mm dot
Native Resolution (Pixel Count):
1024 x 768
pitch; 250 cd/m
2
white luminance, 400/
450:1 contrast ratio, typical.
Input Signal
Video:
ANALOG 0.7 Vp-p/75 Ohms
Sync:
Separate sync.TTL Level (Positive/Negative)
Horizontal sync. Positive/Negative
Vertical sync. Positive/Negative
Display Colours
Analog input:
16,777,216
Depends on display card used.
Synchronization Range
Horizontal:
31.5 kHz to 60 kHz
Automatically
Vertical:
56 Hz to 75 Hz
Automatically
Viewing Angle
Left/Right:
-60°/+60°(CR>10)
Up/Down:
-40°/+60°(CR>10)
Resolutions Supported
Landscape:
720 x 400*
1
: VGA
Some systems may not support all
640 x 480*
1
@ 60 Hz to 75 Hz
modes listed.
800 x 600*
1
@ 56 Hz to 75 Hz
NEC-Mitsubishi Electronics Display cites
832 x 624*
1
@ 75 Hz
recommended resolution at 75 Hz for
1024 x 768 @ 60 Hz to 75 Hz..................... optimal display performance.
Active Display Area
Horizontal:
304.1 mm
Vertical:
228.1 mm
Speakers
Practical Audio Output:
1.0 W + 1.0 W
Power Supply
100 - 240 V ~ 50/60 Hz
Current Rating
0.45 - 0.25 A
Dimensions
Landscape:
347.4 mm (W) x 341.9 mm (H) x 168.5 mm (D) (with stand)
347.4 mm (W) x 296.2 mm (H) x 53.9 mm (D) (without stand)
Weight
3.0 kg
Environmental Considerations
Operating Temperature:
5 °C to 35 °C
Humidity:
30% to 80%
Altitude:
0 to 3,658 m
Storage Temperature:
-10 °C to +60 °C
Humidity:
10% to 85%
Altitude:
0 to 12,192 m
*1 Interpolated Resolutions: When resolutions are shown that are lower than the pixel count of the LCD module, text may appear different. This is
normal and necessary for all current flat panel technologies when displaying non-native resolutions full screen. In flat panel technologies, each dot on
the screen is actually one pixel, so to expand resolutions to full screen, an interpolation of the resolution must be done.
NOTE:
Technical specifications are subject to change without notice.
