5
Tilt
Grasp both sides of the monitor screen with your hands
and adjust the tilt as desired
(Figure TS.1)
.
NOTE: Handle with care when tilting the monitor screen.
Remove Monitor Stand for Mounting
To prepare the monitor for alternate mounting purposes:
1. Disconnect all cables.
2. Place monitor face down on a nonabrasive surface
(Figure R.1)
.
3. Remove the 3 screws connecting the monitor to the stand and slide the
stand off from the LCD
(Figure R.1)
.
The monitor is now ready for mounting in an alternate manner.
4. Connect the AC cord and signal cable to the back of the monitor
(Figure R.2)
.
5. Reverse this process to reattach stand.
NOTE: Use only VESA-compatible alternative mounting method.
NOTE: Handle with care when removing monitor stand.
Quick Start
–continued
Figure TS.1
Figure R.1
non-abrasive
surface
Figure R.2
