background image

English−27

English

Flexible Arm Installation

This monitor is designed for use with a flexible arm. Contact NEC for more information.
Follow the instructions provided by the manufacturer of the display mount. Remove the monitor stand before mounting.

CAUTION::  

To meet the safety requirements, the monitor must be mounted to an arm that supports the weight of the 

monitor. See the Specifications - 

“AS173M” on page 21 and “AS194Mi” on page 22

 for details.

Remove the Monitor Stand for Mounting

NOTE::  

- Handle with care when removing the monitor stand. 

- If the cable cover is installed, remove it before removing the monitor stand. 

- You do not need to separate the base stand from the monitor stand. 

  The monitor stand can be removed with the base stand attached.

1

2

3

Non-abrasive surface

Mount the Flexible Arm

Using four screws that meet the specifications listed below, attach the arm to the monitor.

12 mm

M4

100 mm

6 - 8 mm

Screw (M4)

Unit

Thickness of bracket 

and washer

Lock washer and 

flat washer

Mounting Bracket

(2.0 - 3.2 mm)

100 mm

4 x 12 mm with lock 

washer and flat washer

CAUTION:  •

The monitor should only be used with an approved arm (e.g. TUEV NS mark).

 •

Tighten all screws (recommended fasten torqueN 98 - 137 N•cm).

 •

Attaching the flexible arm should be done by two or more people if the monitor cannot be placed face down 

on a flat surface for installation.

 •

The monitor must be used in the landscape position. hen mounting on a flexible arm, please set the 

monitor in the landscape position with the LED indicator on the bottom bezel.

Summary of Contents for AccuSync AS173M
































Reviews: