78K0R – Save It!
Then locate the sample project on the CD and open the
SAMPLE-TK-78K0RKE3L.eww
workspace file.
Afterwards the IDE should look similar like below.
Figure 33: IAR Embedded Workbench Main IDE window
To verify that the right debugging device is chosen please open the project options window by clicking
Project
Æ
Options
and then open the tab
Debugger
.
Note: Although the On-board debug interface is used, the MINICUBE C-Spy driver must be selected
instead of the standard driver TK-78K used for other starter kits. If the debug session via
MINICUBE2 and the OCD1 connectors shall be started, also the MINICUBE C-Spy driver must
be selected.
The corresponding COM port where the
TK-78K0R/KE3L board
is connected to the host PC will be detected
automatically by the IAR C-SPY debugger.
_______________________________________________________________________________________________
User’s Manual
U19663EE1V0UM00
37
